Skip to content
// RESOURCES

Cap construction: panels to closure

A practical guide to cap construction: 5- vs 6-panel, structured vs unstructured, crown, brim, closure, finishing and specification.

By the Gazelle production team · Updated November 2026

8 min read · ← All guides

Why construction is a specification. Two caps can share a fabric and a logo and still fit, wear and price differently because of construction: panel count, crown height, structure, brim, closure and internal finishing. Buyers who specify construction get fewer surprises; buyers who only send a picture get a interpretation. This guide covers the choices and how to write them down.

1. Panel count. A **6-panel** cap has a seam at the front centre and a symmetrical crown; it suits embroidery and a classic baseball shape. A **5-panel** cap has a seamless front panel, which gives a clean surface for large prints or patches and a flatter profile. **Camp caps** are usually 5-panel with a shorter brim. Panel count changes the pattern, the decoration area and the fit.

2. Structured vs unstructured. A structured cap has a stiffened front (buckram or fused interlining) that holds its shape; an unstructured cap is soft and packs flat. Structure affects the look, the embroidery support and how the cap survives packing. Ask which panels are structured and what stiffener is used, because "structured" is not a single standard.

3. Crown height and profile. Low, mid and high profile describe how deep the crown sits. A deep crown covers more of the head; a shallow crown sits higher. Confirm the front panel height and the crown depth in centimetres, and compare with a reference cap. Profile is a design choice with a fit consequence.

4. Brim and curve. Brim length, width and curve change the look and the shade. Flat brims read streetwear; curved brims read classic. Confirm the brim length, the curve radius, the number of rows of stitching and the stiffness. For visors and bucket hats, the opening and depth matter more than the brim alone.

5. Closure. Snapback, strapback with buckle, hook-and-loop, elastic band and fitted sizes each suit different markets. Confirm the closure type, the adjustment range, the metal or plastic hardware and the colour. A narrow adjustment range limits the fit; a wide range can look bulky.

6. Internal finishing. Taping over the seams, a sweatband (cotton, moisture-wicking or leather), eyelets, a lining and a size label affect comfort and perceived quality. Ask what is standard and what is optional, and confirm the materials. Internal finishing is often where a low quote hides a cost.

7. Decoration compatibility. Construction decides where embroidery, print or patches can go. A 5-panel seamless front is good for large prints; a 6-panel front seam can interfere with a centred logo. A stiff front supports 3D puff; a soft front may need backing. Confirm the decoration method with the construction, not after.

8. Pattern and grading. A pattern is graded across sizes; the same construction can fit differently after grading. Ask how the factory grades, whether the sample is made from the production pattern, and how size tolerances are checked. A good sample from a different pattern is not a guarantee.

9. Packing and shape. Structured caps need shape protection in packing; unstructured caps can be packed flatter. Confirm whether the cap is stuffed, bagged or boxed, and how it survives transit. Packing is part of construction performance.

10. A construction specification. List panel count, structure and stiffener, crown height, front panel height, brim length/curve/stitching, closure type and range, internal finishing, decoration method, size range and pattern reference. Add the approved sample. A construction spec without a sample is a description, not a standard.

11. Common failures. Front panel too stiff or too soft for the decoration. Crown too deep or shallow. Brim curve different from the approved sample. Closure range too narrow. Seam taping missing on a premium product. Grading changes the fit. Each is cheaper to catch at sample stage.

Bottom line. Construction is the skeleton of the cap. Name the panels, structure, crown, brim, closure and finishing; approve a sample made from the production pattern; keep the specification with the order. That is how the cap looks and fits the way it was sold.

Written from our live order experience. Specifications, MOQ, lead times and compliance requirements are set out in your quotation and confirmed at sampling.

Sourcing snapshot
Sampling3–7 days with standard materials
Bulk production25–45 days after sample approval
Peak seasonadd 2–3 weeks
MOQfrom 100 pcs per style and colour (caps)

About this guide

Written by the Gazelle factory team.

OEM/ODM headwear manufacturer since 1979, with factories in Dongguan (Guangdong), Suzhou (Anhui) and Phnom Penh (Cambodia).

Explore cap categories

Related guides

Frequently asked questions

How long does a custom cap order take?

Timing depends on construction, artwork, materials, quantity, approvals, testing and transport. Gazelle confirms a project schedule after reviewing the specification.

What is the MOQ for custom caps?

MOQ depends on the construction, materials, colours and decoration. Send the complete specification and quantity breakdown for confirmation.

Can I get a sample before bulk production?

Yes. Sampling is used to confirm fit, construction and branding before bulk production. Sample scope, charges and timing are agreed for the project.

What compliance documents are available?

Documents and testing are reviewed against the product, destination and customer programme. Provide your requirements during the RFQ so their scope can be confirmed.

Can I use my own fabric?

Customer-specified materials can be reviewed for construction suitability, quality and order requirements. Confirm inspection, testing and responsibilities before production.

Ready to start your project?

Send your specification, artwork, quantities and destination. We will review the project and confirm sampling, pricing and timing.

Request a quote →
WhatsAppInquiry